Do I Need This Tool to Track My Asthma?

Woman and doctor with peak flow meterAsthma is a lung condition that can cause inflammation in your airways, making it difficult to breathe. If you’re having trouble getting — and keeping — your asthma under control, your doctor may recommend measuring your peak flow to help you better manage your condition.

What Is a Peak Flow Measurement?

“Peak flow is basically a way of measuring the maximum amount of air that can be exhaled very quickly as a person is breathing out after they have inhaled,” says Matthew Madden, MD, an internist at Trident Medical Center in Charleston, South Carolina.

This measurement — also known as peak expiratory flow or peak flow rate — can provide insight into how well your lungs are working. A higher peak flow measurement typically means you’re managing well. A lower peak flow measurement suggests that your airways are narrowing due to asthma.

There’s no “normal” measurement to strive for. Instead, you work with your doctor to determine how the test can most accurately describe your condition.

Who Should Measure Peak Flow?

While measuring peak flow can be helpful for many asthma patients, it’s important to recognize that it’s not for everyone.

According to guidelines from the National Heart, Lung, and Blood Institute, [1] your doctor may recommend peak flow monitoring if you:

Patients who meet these criteria will typically use peak flow to establish an initial baseline measurement. Then, Dr. Madden explains, once their asthma is managed well, patients would use peak flow measurement in the case of flare-ups — when they experience symptoms like wheezing or shortness of breath and want to know if it’s their asthma or something else.

How to Use a Peak Flow Meter

If it makes sense to measure peak flow as part of your asthma treatment plan, doing so is relatively simple using a small device called a peak flow meter. While there are several types of meters, they all generally work the same way to gauge your ability to quickly push air out of your lungs. Your doctor will recommend the best one for you.

“It’s important to know how to use a peak flow meter appropriately,” says Madden. A nurse or a respiratory therapist will typically teach you how to use the meter and will observe you using it to make sure you’re getting an accurate measurement.

To best measure your peak flow, be sure to follow these steps at the same time each day:

For the most accurate readings, the American Lung Association [2] recommends that you repeat this routine until you get three consecutive numbers that are close together. Then mark down the highest number of those three (known as your personal best) on your asthma action plan so you can share your results with your doctor at your next checkup.

Ask your doctor what time of day you should measure your peak flow rate, as well as whether you should do so before taking medication, afterward or both — and be sure to follow those instructions each time.

You should also be sure to use the same peak flow meter with each reading. If you get a new meter, you’ll likely have to work with your doctor to establish a new personal best. It’s also a good move to bring your meter to your checkups and to consult with your doctor on the best ways to keep it clean and in working order.

Understanding Your Peak Flow Readings

Your personal best peak flow measurement will become the baseline that you measure against, says Madden. This baseline should be established when you’re feeling well, rather than during an asthma flare up.

Once you’ve worked with your doctor to establish your baseline, it’s important to understand how to interpret your peak flow readings, which fall into three zones: green, yellow, and red. An easy way to gauge how well you’re doing is to think of a traffic light:

You’ll want to work with your doctor to determine which treatment to administer for each zone and when to seek medical care. “Your physician can give you instructions based on the measurements you’re getting or any breathing difficulties you’re having,” says Madden.

The Benefits of Measuring Peak Flow

If you and your doctor decide to add peak flow measurement to your asthma action plan, tracking these readings over time can help you:

What’s more, measuring your peak flow rate over time can help you identify and address changes in your airways before asthma symptoms really set in, which can help you prevent a full-on flare up.

“When peak flow measurements are included as part of a comprehensive asthma action plan,” says Madden, “patients can experience an improved quality of life in terms of decreased asthma symptoms overall and the ability to keep asthma at baseline.”


To find a Mission Health primary care provider [3] who is best for you, call 828-213-3222 [4].